往期文章
Effect of Porosity on the Mechanical Properties and Wear Performance of 2% Copper Reinforced Sintered Steel Used in Shock Absorber Piston Production
Experimental Investigation on the Performance of Armour Grade Q&T Steel Joints Fabricated by Flux Cored Arc Welding with Low Hydrogen Ferritic Consumables
Evaluation of the Electroslag Remelting Process in Medical Grade of 316LC Stainless Steel
Effect of Aging Time and Temperature on Mechanical Properties and Microstructural Evolution of 2205 Ferritic-Austenitic Stainless Steel
Dynamic Recrystallization Behavior of a Fe-Cr-Ni Super-Austenitic Stainless Steel
Effect of Varying Carbon Content and Shot Peening upon Fatigue Performance of Prealloyed Sintered Steels
Influence of Surface Treatment on the Corrosion Resistance of Stainless Steel in Simulated Human Body Environment
Isothermal Growth Kinetics of Ultra-fine Austenite Grains in a Nb-V-Ti Microalloyed Steel
Enhancement of GMI Effect in Silicon Steels by Furnace Annealing
Sliding Wear Behavior of a Grey Cast Iron Surface Remelted by TIG
Reduction of Sensitivity to Sintering Temperature for Nd-Fe-B Magnets through Zr and Nb Additions
Eclipta Alba as Corrosion Pickling Inhibitor on Mild Steel in Hydrochloric Acid
Evaluation of Oxidation of Ti-Al and Ti-Al-Cr Coatings Arc-ion Plated on Ti-60 High-temperature Titanium Alloy
Effects of Yttria Addition on Microstructure, Mechanical Properties, Wear Resistance and Corrosive Wear Resistance of TiNi Alloy
Effect of Alloying Elements on Microstructure, Martensitic Transformation and Mechanical Properties of Ni-Mn Based Alloys
Effect of Process Parameters on Tensile Strength of Friction Stir Welded Cast LM6 Aluminium Alloy Joints
Dependence of Amorphous Formation Ability on Intrinsic Parameters in Dy-Gd-Co-Al Alloys
Morphology Control and Optical Absorption Properties of Ag Nanoparticles by Ion Implantation
Liquid Phase Behavior during Elevated Temperature Deformation of the Fine-Grained 5083 Al Alloy
Analysis of the Vertical and Lateral Interactions in a Multisheet Array of InAs/GaAs Quantum Dots
Effect of Sample Configuration on Droplet-Particles of TiN Films Deposited by Pulse Biased Arc Ion Plating
Microstructure and Wear Behavior of FeBSiNbCr Metallic Glass Coatings
Effects of Homo-buffer Layer on Properties of Sputter-deposited ZnO Films
Preparation, Microstructure and Properties of NiO-Cr_2O_3-TiO_2 Infrared Radiation Coating
Effects of Interface and Grain Boundary on the Electrical Resistivity of Cu/Ta Multilayers
Optimization of Polishing Parameters with Taguchi Method for LBO Crystal in CMP
Multi-objective Optimization of Co-cured Composite Laminates with Embedded Viscoelastic Damping Layer
Study of Debond Fracture Toughness of Sandwich Composites with Metal Foam Core
Preparation of Al_3Sc Intermetallic Compound by FFC Method